Outdoor Adversting Board Open Cell Panel LCD RV376fbb-N00

• Screen Size: 37.6inch
• Application: Indoor, Advertising, Outdoor, Big-Screen Project, Taxi, Bus
• Aspect ratio: 3:1
• Feature: 3D Display, LCD Display
• Optimum Resolution: 550*1088
• Type: TFT
• Model NO.: RV376FBB-N00
• Response Time: 2ms
• 3D: 3D
• Interface Type: HDMI
• Transport Package: Wooden Bracket
• Specification: 37.8INCH-55INCH
• Trademark: RINA TECH
• Origin: Shenzhen, Guangdong
• HS Code: 85312000

Product Description

Outdoor Adversting Board Open Cell Panel LCD RV376FBB-N00

Product Description

1.1 Introduction
 

RV376FBB-N10 is a color active matrix TFT LCD open cell using amorphous silicon TFTs (Thin Film Transistors) as active switching devices. This open cell has a 37.6-inch diagonally measured active area with FHD resolutions (1920 horizontal by 540 vertical pixel array). Each pixel is divided into RED, GREEN, and BLUE dots arranged in vertical stripes and this module can display 16.7M colors. The TFT-LCD panel is adapted for a low reflection and higher color type.
1.2 Features of the open cell

LVDS interface with 2-pixel/clock

High-speed response

Low color shift image quality

8-bit color depth, display 16.7M colors

Wide viewing angle

DE (Data Enable) only mode

ADS technology is applied for high-display quality

RoHS compliant

1.3 Application of the open cell

Indoor Commercial Digital Display

Indoor Display Terminals for Control System

Indoor Landscape and Portrait Display

1.4 General specification
 

Parameter	Specification	Unit	Remarks
Active area	919.296(H) × 258.552(V)	mm
Number of pixels	1920(H) × 540(V)	pixels
Pixel pitch	159.6× 478.8	μm
Pixel arrangement	Pixels RGB Vertical stripe
Display colors	16.7M	colors	8bits True
Display mode	Normally Black
Dimensional outline(Panel)	934.896(H) × 271.052(V)	mm	Detail refers to drawing
Weight	0.81± 0.05	kg	With BOE TCON board
Power Consumption	2.4W	Watt	Typ.
Surface Treatment	Haze 1%, 3H

1.5 Packing
1.6 Mounting Precautions

• Use finger-stalls with soft gloves in order to keep the display clean during the incoming inspection and assembly process.

• You must mount a module using specified mounting holes (Details refer to the drawings)

• You should consider the mounting structure so that uneven force (ex. Twisted stress, Concentrated stress)is not applied to the module. And the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module.

• Do not apply mechanical stress or static pressure on the module; Abnormal display caused by pressing some parts of the module during the assembly process, does not belong to product failure, the press should be agreed upon by two sides.

• Determine the optimum mounting angle, refer to the viewing angle range in the specification for each model.

• Do not apply mechanical stress or static pressure on the module, and avoid impact, vibration, and falling.

• Acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas attacking the polarizer at high temperatures and the latter causes circuit break by the electrochemical reaction.

• Protection film for the polarizer on the module should be slowly peeled off before display.

• Be careful to prevent water & chemicals contact the module surface.

• You should adopt a radiation structure to satisfy the temperature specification.

• Do not touch, push or rub the exposed polarizers with glass, tweezers, or anything harder than HB pencil lead. And please do not rub with dust clothes with chemical treatment. Do not touch the surface of the polarizer with a bare hand or greasy cloth. (Some cosmetics are detrimental to the polarizer.)

• When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaked with petroleum benzene. Normal hexane & alcohol is recommended for cleaning the adhesives used to attach front / rear polarizers. Do not use acetone, or toluene, because they cause chemical damage to the polarizer.

• Wipe off saliva or water drops as soon as possible. Their long-time contact with polarizers causes deformations and color fading.

Company Profile

RINA TECH is a global high-tech company specializing in the research, development, production, and sales of optical materials, providing customers with one-step optical lighting solutions. Was established in Hong Kong in 2011, and after years of rapid development, RINA Technology has set up an office and factory in Shenzhen.

 Currently, we are working with companies such as Toyota, BOE, FLEX, Xiaomi, Siemens, Coca-Cola, etc.

 
We have made many breakthroughs in research and manufacturing, and have gained a good reputation from many oversea customers.

 Through sustainable business operations in more than 30 countries and territories around the world, we provide technology innovation, supply chain, and manufacturing solutions to various industries and end markets.

Certificates

 

Shipping

FAQ

1. What is the operating temperature of the LCD displays?  

The operating temperature is -30ºC -+80ºC for the LCD displays.

 

2. Can you give me an open-cell sample order?

Of course, we accept sample orders.

 

3. What kinds of payment methods do you accept?

 T/T bank transfer, West Union and Paypal.

 

4. Can I customize the open cell size that I need?

The size custom needs to contract with our Professional business staff, the size can be cut from large to small, unable to cut large, you can choose from the sizes we have and communicate with our staff, and they will give you a professional program as well as advice.

5. Whether the specification of the open cell is A gauge?
YES, if the quality is below A gauge, we do not do it.

 

Having been known as one of the professional LCD open cell rv376fbb-n10 suppliers, Rina Technology is a successful company of open cell. We have hundreds of well-educated and experienced staff working in our factory who are dedicated to developing, manufacturing, and selling high-quality products. With many products in stock, we warmly welcome you to get our customized products at low prices.